Premium Microcement - Ultrafine – Terraesta Microcement

Coverage Area - Microcement

Ensure accurate material planning for your projects with this coverage reference.
The table below specifies the estimated coverage area based on a two-coat application at 2-3mm thickness.

Weight	Coverage Area
15 kg	8 m² (*7 m²)
30 kg	16 m² (*14 m²)
45 kg	24 m² (*21 m²)
60 kg	32 m² (*28 m²)

Note: Actual coverage may vary depending on surface conditions and application technique. Always allow for an additional margin to account for surface variability.

*Coverage may be slightly reduced when applied over Fibermesh.

Microcement Ultrafine is designed for achieving smooth, refined finishes on a variety of surfaces.

Price per m²: Rp 350.000,00

Product information

- Kitchen Countertops - Use only for small areas; smoothest finish, harder to apply well.

- Bathroom Sink (Top) - Only for skilled applicators; fine finish for small surfaces.

- Furniture (Tables, etc.) - For fine finishes on small furniture; only with skilled installers.

*Larger areas require skilled workers to achieve great results

- Suitable for floors, walls, and furniture

- Can be used in bathrooms with proper sanding to reduce pores that may trap dirt or debris

- Often paired with fiberglass mesh during the first layer for added stability

- Excellent adhesion properties.
- Provides a smooth, polished finish.
- Seamless results.
- Can be tinted in any desired color for a personalized look

- Can be applied by any trained worker

- Standard tools and basic preparation are sufficient

- No specialized machinery required

1. Preparation:

- Fill and sand joints or unevenness as needed.

- Use fiberglass mesh for areas requiring reinforcement.

2. Layering:

- Apply the first layer (1mm thick) along with fiberglass mesh. Ensure the mesh does not overlap.

- Sand the surface smooth after each layer to avoid visible joints or burn marks (black spots caused by uneven microcement).

3. Consistency Adjustment:

- If the material feels too thick or dries too quickly, adjust by adding a small amount of water (approximately 1 dl).

4. Final Finish:

- Apply subsequent thin layers (approximately 0.5mm thick) to achieve the desired smoothness.

Hardening and Varnishing:

- Apply hardener and hard lacquer to protect the surface from stains and chemicals.

- Use at least 2 layers on walls and 3-4 layers on floors for optimal durability.

Tester ² Coatings ² Add-ons ³